Curtain Rails & Rods Installation in Rolleston & Selwyn

New curtains are no good still in their packaging because the rail defeated you. Curtain rails and rods look simple until you meet a concrete lintel, a steel-framed window or a gib wall with nothing solid behind it. We install curtain rails, rods and blinds across Rolleston and the wider Selwyn District — measured twice, drilled once, and mounted so securely you will never think about them again.

Getting it right starts before any drilling. We confirm the rail or rod suits the window: enough overhang each side so curtains stack back off the glass, brackets clear of handles and architraves, and centre supports on wide spans so nothing sags in the middle. Then we fix into what is actually there — studs where we can find them, and proper cavity or masonry anchors where we cannot. Heavy blackout curtains and thermal drapes get particular respect, because their weight will find any weak fixing within a month.

Level, centred and built to last

A rail that is three millimetres out over two metres will show every time the curtains move — so we work with a proper level, not an eyeball. Brackets go up evenly spaced, end caps and finials fitted, and the rail tested with a firm pull before we call it done. If you are fitting blinds instead, we mount the brackets plumb and square so the blind runs true without rubbing or jamming, and we check the full drop before we leave.

Renters and new-build owners are some of our most common customers for this job: one wants no unnecessary holes, the other wants everything perfect from the start. Either way, call or text 027 592 9582, tell us how many windows and what hardware you have, and we will arrange a time. It is very often a job we can combine with picture hanging or other small fixes in the same visit.

• Curtain rails and rods mounted level and centred
• Blind brackets fitted plumb so blinds run true
• Fixings matched to gib, timber, brick and concrete
• Centre supports on wide spans — no sagging rails

Frequently asked questions

Do I need to buy the rail first? Yes — have your rail, rod or blind ready, and we will handle the mounting. If you are unsure what suits the window, call us before you buy.

Can you mount on concrete or brick? Yes, with the right masonry fixings — just mention the wall type when you call.

How long does it take? Most single windows are done well inside the hour; a whole house is usually a half-day job.